Commercial Sign Painting
Painted signs on the sides of buildings and on rooftops, plus repainting faded signs.
A painted sign on the side of your building or on your roof is hard to miss and doesn't need a light or a frame. I paint business names, lettering and logos directly onto walls and roofs for businesses in Maryville, Alcoa, Knoxville and across Blount and Knox Counties, and I refresh old signs that have faded.

Wall signs
Lettering and logos painted right on the side of your building, from a simple business name to an old-fashioned, hand-painted look like the faded "ghost signs" you see on older brick buildings. I can paint on brick, block, stucco and metal walls, and on interior office walls.

Rooftop signs
Your name or logo painted on the roof, sized and laid out so it reads clearly from the road or from above. If you already have a rooftop sign that's faded or peeling, I can repaint it.
Wall sign, before and after
Mahood's Collision took down its mounted cabinet signs, and I painted a wall sign in their place. More about this job ›
A note on permits: Many cities treat a sign painted directly on the wall differently from a mounted cabinet or channel-letter sign, and the permit path is often simpler. Rules vary by city, so I'll help you check with yours before we start.
Getting the surface ready
A sign only lasts as long as the surface under it. Before I paint, I look at what the wall or roof is made of and what shape it's in, then prep it the right way:
- Brick and block: cleaned of dirt and loose material, with any crumbling mortar or chalky old paint dealt with first so the new paint can grip.
- Stucco: checked for cracks and loose patches, which get repaired before the sign goes on.
- Metal: cleaned, with rust and flaking paint removed and the right primer used so the paint sticks.
- Roofs: the roof surface has to be clean, dry and sound. I'll tell you honestly if a roof isn't a good candidate for paint.
Weather matters too. Paint needs dry days and the right temperatures to cure, so outdoor sign work is scheduled around the forecast.
How it works
- Free estimate. I come look at the wall or roof, and we talk about the wording, logo, colors and size you want.
- Layout. We settle on the design and where it goes before any paint is opened.
- Scheduling. I work around your business hours. Evening and weekend scheduling is available.
- Prep and painting. I prep the surface, lay out the sign, and paint it. I'm a one-man crew, so the person who gives your estimate is the person who paints your sign.
The RateHighway logo wall
In 2013 I laid out and painted this RateHighway logo on an interior office wall. I projected and traced the design, masked it by hand, and painted it with a brush and roller. Then I coated the wall with a clear dry erase finish, so the logo wall also works as a whiteboard. I can do the same for an office or conference room — see dry erase walls ›







Mahood's Collision: mounted signs replaced with a painted wall sign
Mahood's Collision took down its mounted cabinet signs, and I painted a wall sign in their place — the shop name and address lettered directly on the building. This is not a faded-sign restoration. A note on permits for painted signs › See the case study ›
A rooftop sign, start to finish
In July 2012 I painted this rooftop logo for Ingram Micro on the office building they occupied at the time. I measured and laid out the letters on the roof myself, outlined them, and then painted the logo section by section so it reads correctly from the air. I also painted the building number, 1600, on the roof. The logo is 75 feet by 40 feet, in blue, red and black, and the work took about seven business days, including stencil, tracing and painting. See the case study ›









Front page, Orange County Business Journal, September 3–9, 2012: “Sky-High Renown.” The article describes “Irvine-based commercial painting contractor Le Tourneau Painting.” Ingram Micro’s VP of Marketing North America, Jennifer Anaya, is quoted in the article calling the rooftop logo “the lowest cost per eyeball from any type of outdoor media.”
Custom barcode wall graphic
A custom barcode painted as a large exterior wall graphic — an orange field with white stripes and numbers, laid out and sprayed so it reads as a barcode from the parking lot. See the case study ›





Transtar Metals to Castle Metals, before and after
When Transtar Metals became Castle Metals, I painted the new name and logo where the old signs had been, on the warehouse wall and on the outside of the building.
More signs and logo walls
More of my sign and logo work, from the layout and masking to the finished wall.












Sign painting questions
Do you paint signs on the outside walls of buildings?
Yes. I paint lettering and logos directly on exterior walls, including brick, block, stucco and metal. I'll look at the wall first and tell you honestly what it needs before any paint goes on.
Can you paint a sign on a roof?
Yes. Rooftop lettering and logos can be painted so they're readable from the road or from above. Every roof is different, so I'll look at the roof surface and how to get to it safely before I give you an estimate.
Can you repaint an old, faded sign?
Yes. Faded wall and rooftop signs can usually be cleaned, prepped and repainted in the same layout, or updated with new wording or colors.
Can you work around my business hours?
Yes. Evening and weekend scheduling is available, so the work doesn't get in the way of your customers.
Do I need permission from the city for a painted sign?
Many cities treat a painted wall sign differently from a mounted cabinet or channel-letter sign, and the permit path is often simpler. Rules still vary, so I'll help you check with your city before we start.
Are estimates free?
Yes. Call 865-377-8366 or send a message, and I'll come look at the wall or roof and talk through what you have in mind.
See also: Gallery.
Want a sign on your wall or roof?
Call or text Chad directly. Evening and weekend scheduling available.









